关键字:
网站秒速赛车 关于我们 润滑油产品 产品总汇 润滑油知识 新闻中心 客户反馈 联系我们
产品总汇
UP润滑油
壳牌润滑油系列
美孚润滑油系列
加德士润滑油系列
嘉实多润滑油系列
BP润滑油系列
道达尔润滑油系列
福斯润滑油系列
克鲁勃润滑油系列
Esso润滑油系列
国光牌润滑油
无磷环保清洗剂
REGO-FIX夹头
联系我们

深圳市奥伯孚科技秒速赛车官网

联系人二:邓生/13088801555
分部电话:0755-36934146
分部传真:0755-07558688
QQ:1031101504   813989043
 
RENOLIN CLP 系列

秒速赛车导航网

添加时间:2013-3-6 10:52:45       浏览次数:367
  详细信息

RENOLIN UNISYN CKC

Polyalphaolefin-Based Industrial Gear and Lubricating Oils

Designed for use in industrial gearboxes and general lubricating systems subject to high temperatures, RENOLIN UNISYN CKC oils are fully-synthetic lubricants based on polyalphaolefins. RENOLIN UNISYN CKC oils lower friction and reduce wear. Furthermore, these oils increase the efficiency of machine components. Depending on the application, a number of viscosity grades can be satisfied by a single RENOLIN UNISYN CKC oil. This allows users to rationalize stocks and cut costs. Polyalphaolefins, and thus RENOLIN UNISYN CKC oils, are miscible and compatible with mineral oils at all ratios and can be disposed-of as such. The compatibility of polyalphaolefins with common machinery materials, seals and paint finishes is comparable with that of mineral oils. Changing-over to RENOLIN UNISYN CKC is therefore very simple and requires no prior flushing. RENOLIN UNISYN CKC oils can be classified as CKC lubricating oils according to ISO 6743-6.

The specific benefits of using RENOLIN UNISYN CKC oils are:
 


  • Extremely good ageing resistance

  • Excellent corrosion protection

  • Good cold-flowing properties

  • Excellent viscosity-temperature behaviour

Application:

RENOLIN UNISYN CKC oils can be used in bearings, lubrication systems and gearboxes subject to high or fluctuating temperatures.
In gearboxes and lubricating systems where the sump temperatures exceed 90°C, normal mineral oil change intervals can be significantly extended with RENOLIN UNISYN CKC oils which, in turn, substantially lower operating and disposal costs.
When changing-over to RENOLIN UNISYN CKC oils in machines and equipment which operate at temperatures of over 60°C, one viscosity grade lower than the normal mineral oil grade should be selected.

RENOLIN UNISYN CKC   68 100 150 220 320 460 680  
Lubricating oil type                  
acc. to ISO 6743-6   CKC 68 CKC 100 CKC 150 CKC 220 CKC 320 CKC 460 CKC 680  
acc. to DIN 51 502   HC 68 HC 100 HC 150 HC 220 HC 320 HC 460 HC 680  
Characteristics Unit               Test method
Kinematic viscosity                  
at 40 °C mm²/s 72 104 151 221 315 479 668 ASTM D 445
at 100 °C mm²/s 11.1 14.9 19.4 25.8 33.3 45 62 ASTM D 445
Viscosity index   146 149 147 148 148 149 159 ASTM D 2270
Density at 15 °C kg/l 0.837 0.842 0.848 0.85 0.851 0.853 0.855 ASTM D 1298
Flash point, Cleveland open cup °C 248 254 230 232 234 304 262 ASTM D 92
Pour point °C -51 – 45 – 45 – 42 – 39 – 33 – 33 ASTM D 97
Neutralization number mg KOH/g 0.8 0.9 0.9 0.9 0.9 0.9 0.9 ASTM D 974
Foaming,                  
seq. I ml 5/0 5/0 5/0 5/0 5/0 5/0 5/0 ASTM D 892 seq. I III
seq. II ml 15/0 15/0 15/0 15/0 15/0 15/0 15/0 ASTM D 892 seq. I III
seq. III ml 5/0 5/0 5/0 5/0 5/0 5/0 5/0 ASTM D 892 seq. I III
Copper corrosion degree of corr. 1a-100A24 1a-100A24 1a-100A24 1a-100A24 1a-100A24 1a-100A24 1a-100A24 ASTM D 130
Rust prevention   pass B pass B pass B pass B pass B pass B pass B ASTM D 665
Four ball EP test N 2200 2400 2400 2400 2400 2400 2400 ASTM D 2783
FZG mechanical gear rig test load stage > 12 > 12 > 12 > 12 > 12 > 12 > 12 DIN 51 354-2

 

上一篇: RENOLIN CKC
下一篇: 无

版权所有:深圳市奥伯孚科技秒速赛车官网   分部地址:深圳市宝安区龙华镇龙华路168号
分部电话:0755-36934146   分部传真:0755-07558688 邮箱:cs_yuxiang@163.com  友情链接:http://www.abf-kyj.com