关键字:
网站秒速赛车 关于我们 润滑油产品 产品总汇 润滑油知识 新闻中心 客户反馈 联系我们
产品总汇
UP润滑油
壳牌润滑油系列
美孚润滑油系列
加德士润滑油系列
嘉实多润滑油系列
BP润滑油系列
道达尔润滑油系列
福斯润滑油系列
克鲁勃润滑油系列
Esso润滑油系列
国光牌润滑油
无磷环保清洗剂
REGO-FIX夹头
联系我们

深圳市奥伯孚科技秒速赛车官网

联系人二:邓生/13088801555
分部电话:0755-36934146
分部传真:0755-07558688
QQ:1031101504   813989043
 
RENOLIN CLP 系列

秒速赛车手机官网

添加时间:2013-3-6 10:51:19       浏览次数:370
  详细信息

RENOLIN CKC

High Performance CKC Gear Oils

High Performance CKC Gear Oils

Gearboxes designed for the transfer of power or torque can only perform effectively when excessive wear which can occur at high or fluctuating loads, particularly around the reference circle, is avoided. The life of a gearbox depends on the correct selection of the most suitable lubricating oil. The principal function of a gear oil is not just to lubricate bearings and the gears themselves, i.e. to reduce friction and avoid wear but also to provide protection against corrosion, to cool and to seal. The RENOLIN CKC gear oils contain carefully selected base oils and matched additives to protect machinery from undue wear in especially critical boundary friction conditions. RENOLIN CKC products can be classified as CKC lubricating oils according to ISO 6743-6.

The special characteristics of RENOLIN CKC series lubricants are:
 


  • High pressure absorption and excellent wear protection

  • Good viscosity-temperature behaviour and excellent low-temperature characteristics

  • Good corrosion protection for steel and nonferrous metals

  • Good resistance to ageing

  • Good compatibility with sealing materials

  • Low foaming

  • Avoidance of frictional vibration by the use of surface-active additives

  • Good demulsification characteristics

  • Multipurpose applications


Application:

RENOLIN CKC series oils are recommended for all industrial applications where the machinery manufacturer recommends the use of a CKC type oil. Highly-stressed bearings, joints, pressure spindles, spur and worm drive gears are reliably, effectively and economically lubricated at temperatures of up to 120°C. The use of these oils guarantees the quiet and smooth running of machinery along with optimum operational reliability. The use of these oils also allows drain intervals to be extended. Please consult our Application Engineers for suggestions on how this series of oils can be used to rationalize oil stocks.



RENOLIN CKC   100 150 220 320 460 680  
Lubricating oil type                
acc. to ISO 6743-6   CKC 100 CKC 150 CKC 220 CKC 320 CKC 460 CKC 680  
acc. to DIN 51 502   CLP 100 CLP 150 CLP 220 CLP 320 CLP 460 CLP 680  
Characteristics Unit             Test method
Colour   2 3 4 4.5 5 5 ASTM D 1500
Kinematic viscosity                
at 40 °C mm²/s 94.4 145.6 214 331 468 690 ASTM D 445
at 100 °C mm²/s 11.1 14.5 18.5 24.6 30.8 36.8 ASTM D 445
Viscosity index   102 98 96 96 95 87 ASTM D 2270
Density at 15 °C kg/l 0.884 0.89 0.895 0.9 0.903 0.922 ASTM D 1298
Flash point, Cleveland open cup °C 220 225 230 230 240 245 ASTM D 92
Pour point °C – 27 - 24 - 21 - 15 – 12 – 12 ASTM D 97
Neutralization number mg KOH/g 0.33 0.33 0.33 0.33 0.33 0.33 ASTM D 974
Saponification number mg KOH/g 1.3 0.84 0.84 0.84 0.84 0.84 ASTM D 94
Sulphate ash % mass 0.1 0.1 0.1 0.1 0.1 0.1 ASTM D 874
Water content % mass not traceable not traceable not traceable not traceable not traceable not traceable ASTM D 95
Insolubles % mass not traceable not traceable not traceable not traceable not traceable not traceable DIN 51 592
Demulsification min < 20 < 20 < 20 < 20 < 20 < 20 DIN 51 599
Foaming,                
seq. I ml < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 ASTM D 892 seq. I-III
seq. II ml < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 ASTM D 892 seq. I-III
seq. III ml < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 ASTM D 892 seq. I-III
Copper corrosion degree of corr. 1a-100A3 1a-100A3 1a-100A3 1a-100A3 1a-100A3 1a-100A3 ASTM D 130
Rust prevention   pass B pass B pass B pass B pass B pass B ASTM D 665
Ageing behavior,                
viscosity increase % 1 1 1 1 1 1 ASTM D 2893
precipitation number increase ml < 0.05 < 0.05 < 0.05 < 0.05 < 0.05 < 0.05 ASTM D 2893
FZG mechanical gear rig test load stage 12 12 12 12 12 12 DIN 51 354-2
Effect on SRE-NBR 1 seal material acc to DIN 53 538-1 at 100 °C +/– 1 °C after 7 days +/– 2 hours,                
relative volume change % 7 7 7 7 7 7 DIN 53 521 together with DIN 53 505
change in Shore A hardness Shore - 3 - 3 - 3 - 3 - 3 - 3 DIN 53 521 together with DIN 53 505

 

上一篇: RENOLIN CLP 320 PLUS
下一篇: RENOLIN UNISYN CKC

版权所有:深圳市奥伯孚科技秒速赛车官网   分部地址:深圳市宝安区龙华镇龙华路168号
分部电话:0755-36934146   分部传真:0755-07558688 邮箱:cs_yuxiang@163.com  友情链接:http://www.abf-kyj.com